Ocelot 3G-SDI Router (16x8 | 16x16)
3G-SDI 16X8 or 16X16
PESA's Ocelot-3 is a one rack unit, 16x8 or 16x16, video router which supports all SMPTE standard data rates from 143Mbps to 3Gbps with auto-equalization on all sixteen standard 75 Ohm input BNCs. Auto-rate sensing and auto-reclocking is standard on all sixteen 75 Ohm output BNCs with full support for DVB-ASI on every path. A single standard 75 Ohm BNC reference input is provided, capable of accepting analog black burst or analog composite sync in NTSC or PAL formats. The Ocelot-3 can be equipped with single or dual power supplies and is compatible with all existing Ocelot control panels and PESA control systems.
Features
PESA's Ocelot 3 is a one rack unit, 16x8 or 16x16, video router that supports all SMPTE standard data rates from 143Mbps to 3Gbps with auto-equalization on all sixteen standard 75 Ohm input BNCs.
Auto-rate sensing and auto-reclocking is standard on all sixteen 75 Ohm output BNCs with full support for DVB-ASI on every path. A single, standard 75 Ohm BNC input is provided for connection of a sync reference signal from an external source. Ocelot can accept any of the following sync sources: analog black burst or analog composite sync in NTSC or PAL formats.
The Ocelot-3 can be equipped with single or dual power supplies and is compatible with all existing Ocelot control panels and PESA control systems.
Specifications
| Serial Digital Video Module Specifications | |
|---|---|
Inputs/Outputs
| Connector Type | Standard 75 Ohm, Self-terminating, SMPTE 259M, 292M, 424M |
| Return Loss |
>15dB from 5Mhz to 1.5Ghz >10dB, 1.5Ghz to 3GHz |
| Equalization | SMPTE 259M - 300m; SMPTE 292M - 100m SMPTE 424M - 80m Based on Belden 1694a or equal |
| Level |
800mVpp+/-10% |
| Digital Signal Performance Specifications |
|
|---|---|
Inputs/Outputs
| Rise/Fall Time |
< 600 ps, +/- 10% | SMPTE 259M |
| Overshoot | < 10% of amplitude ( max.) |
| Alignment Jitter |
< 0.2UI , 100kHz to 150MHz SMPTE259M or SMPTE292M |
| Timing Jitter |
<1.0UI from 10Hz to 100kHz | SMPTE 259/292 |
| Operational Mode |
AUTO - detects correct signal type |
| Reference Inputs |
Two independent 75Ohm BNCs, 0.5Vpp to 2.0Vpp; PAL, or NTSC |
SEE PESA AT THE FOLLOWING SHOWS
2013 SHOW SCHEDULE
INFOCOMM 2013
June 12-14
Orange County Convention Center
BOOTH 2958
Orlando, FL
Going to Infocomm?
Get a FREE EXPO PASS
use VIP Code: PES660
