PESA XSTREAM Features/Specs

Hover Over Connections to See Details



Number 5 Video processing channels
Source BNC input or decoded from IP stream


Number 5 BNC connectors
Type Standard 75 Ohm, self-terminating
Formats Analog: NTSC/PAL
Digital: SMPTE ST-292 (720p, 1080i), ST-424 (1080p)
Return Loss ≥15dB 1MHz to 1.5GHz; ≥10dB, 1.5GHz to 3GHz.
Equalization 200m auto-equalization Belden 1694A or equivalent at 1.5Gbps;
140m auto-equalization Belden 1694A or equivalent at 3.0Gbps

IP Streaming

Connection RTP/RTSP Format H.264 (MPEG 4/Part 10)

Supported IP Cameras*

*Additional cameras being added on a regular basis
Contact PESA if the specific camera you are using is not listed.


Source Analog audio, Line/mic level, 8 channels De-embedded from SDI video input, up to 10 available sources Decoded from IP video stream , up to 5 available sources
Test tone, internally generated
Number 8 Audio processing channels, selected from any of the above sources

Analog Audio

Type 25 Pin D connector for use with optional XLR breakout cable for 8 connections
Format Balanced
Audio Level Mic level with user selectable “phantom power” or line level inputs
Gain Adjustment +12dB to -40dB line level/+59dB to 0 dB mic level

IP Streaming

IP Streams
Number 6 Individually addressable IP streams: five streams each containing video from one of the five input processing channels plus any/all audio signals paired to each video channel; the sixth tream containing signal from quadview processor plus audio signal paired to quadview channel
Connection RTMP, RTP/RTSP, Unicast, Multiple Unicast, Multicast (IGMP v3)
Format Video – H.264 (MPEG 4/Part 10)
Audio – AAC
Resolution 720p, 1080p
Streaming (selectable) .5Mb, .75Mb, 1Mb, 2Mb, 4Mb
Connector 2 RJ-45 for 10/1000 Gig-E Ethernet port




Number 1 Full screen (selectable from any video and audio source)
1 Quadview (video quadview and any selectable audio source)



Type USB 2.0
Content All active video streams plus selected audio


Type USB 2.0
Content 8 pre-mix channels in uncompressed format


SDI (available with external HDMI to HD-SDI converter kit)

Number 2
Type 75 Ohm BNC’s, using available accessories
Resolution Viewable Format: 720p, 1080p
Power external unit uses 5VDC, 90-220VAC wall plug
NOTE: requires allocation of one HDMI connector on the frame



Number 2 (XLR line level – balanced)
Type Analog
Headphone ¼” Stereo jack – front panel mounted
Audio Out 1 on left channel output and Audio Out 2 on right channel output

Network Connections

Network Connections

Number 2 RJ-45
Type Gig-E (100/1000)
Control Protocol HTTP, HTTPS ( web control management software)


Form Factor 1RU
Mechanical 19.00W X 1.75H X 10.50 D
482.6 mm X 44.45 mm X 266.7 mm
Weight 4lbs

Environmental & Misc

Control Ethernet
Control Connection RJ-45
AC Input Connections IEC 320C6 socket (accepts IEC 320 C5 line cord)
Network Control Supports PESA web-based control or by SDK kit
Input Voltage 90-260 VAC, 47-63Hz
Operational Temp 0-40 degrees C
Operational Humidity 90% Non-condensing

Accessories and Options

PRO-HDMI2HD-C Converts signals from HDMI port to SDI outputs
81902806970 Cable Assembly: Audio XLR to DB25M, 3m
81902806910 Cable Assembly: Ethernet Cable, 1m
81902807090 Cable Assembly: HDMI Cable, 3m
81902807100 Cable Assembly; USB Type A to Type B, 3m
call Storage Drive; 2.5” SATA, removable


Translate »