DRS AES Audio-Balanced

project posted:

PESA offers two connector choices in dedicated input or dedicated output frames for balanced AES digital audio channels. Each frame provides 64 AES digital audio channels through either ELCO block style connectors or 6-pin pluggable style connectors. Each balanced input or output connection through either connector type is available with AC coupled or DC coupled signal connection points. Because each AES channel carries a pair of mono audio signals, 64 AES input or output channels occupy the full 128 audio channel capacity of the frame. With input frames, audio pairs are separated and routed through DRS as two completely independent audio signals. With output frames, any two audio signals routed through DRS may be selected to form the output pair for a specific AES output channel. Each frame provides two power supply module slots. One power supply is required for frame operation; a second power supply may be added for power redundancy.

Split I/O signal frames for balanced AES digital audio are available with two connector style choices. Each frame provides 32 AES digital audio input channels and 32 AES digital audio output channels through either ELCO block style connectors or 6-pin pluggable style connectors. Each balanced input or output connection through either connector type is available with AC coupled or DC coupled signal connection points. Since each AES channel carries a pair of mono audio signals, 32 input channels and 32 output channels fill the 128 audio channel capacity of the frame as 64 input signals and 64 output signals. AES digital input signal pairs are separated and routed through DRS as two completely independent audio signals. Any two audio signals routed through DRS may be selected to form the output pair for a specific AES digital output channel. Each frame provides two power supply module slots. One power supply is required for frame operation; a second power supply may be added for power redundancy.

Download Brochure    

FEATURES

  • Distributed routing between signal frames
  • Simplified wiring schemes and cabling requirements
  • 128 I/O signals in a 1 RU frame
  • Choice of external signal connector types
  • Scalable from 64X64 up to 2048X2048
  • In-field expansion capability
  • Signal transport via Gig-E Ethernet
  • Full Dolby-E support
  • Allows simultaneous routing of AES and analog audio, embedded, MADI and time code signals
  • Allows mix of synchronous and asynchronous signals
  • Digital signal processing (DSP) on all audio input and output signals
    • Gain adjustment
    • Delay
    • L/R Summing
    • L/R Swapping
    • AES pair breakaway
  • Internal signal generator can insert a test signal into any audio output channel you select from the following
    available test signals:

    • Audio silence
    • Steady and sweep test tones
    • White noise
    • Pink noise

SPECIFICATIONS

Inputs / Outputs
Connector Types 6 Pin Detatchable: one balanced AES stream per connector
ELCO/EDAC 120: 16 balanced AES streams per connector
Input Level 0.5-7.0 Vp-p
Input Impedance 110 Ohms
Input Sample Rate 32 kHz – 96 hHz
Output Level nominal 2 Vp-p
Output Impedance 110 Ohms
Output Sample Rate 48 kHz or 96 kHz, GUI selectable
Dolby Support 48 kHz synchrous Dolby/Dolby-E are supported
Digital Signal Processing
Gain Adjustment Independent +/- 6 dB adjustment in 0.1 dB increments for each input and output, GUI selectable
Audio Delay Independent delay elements for inputs and outputs. Unrestricted mode provides 0.341 milliseconds (>10 NTSC frames) for each input and output. Restricted mode provides up to 1.365 seconds (>40 NTSC frames) of delay per input and output for a limited number of channels. All delay parameters are GUI selectable
Phase/Inversion Independent Control for each input and output, GUI selectable
Stereo Remedies Independent Control for each pair of inputs and outputs. The L and R channels of each pair may
be individually set to L, R, L+R or L-R. All stereo remedies are GUI selectable.
Environmental/Miscellaneous
AC Input Connectors IEC 320C6 socket power (accepts IEC 320 C5 line cord)
Requirement 60VA Max per frame
Input Voltage 90-260 VAC, 47-63 Hz
Operational Temperature 0-40 degrees C
Operational Humidity 90% non-condensing
Mechanical Dimensions 1RU 1.75″ H x 19.00″ W x 14.75″ D
Weight 12 lbs.
DRS-FRM-IAES-W 6-Pin Pluggable, AES Audio Input, 110 Ohm
DRS-FRM-OAES-W 6-Pin Pluggable, AES Audio Output, 110 Ohm
DRS-FRM-64-IOAES-W 6-Pin Pluggable, AES Audio Input/Output
DRS-FRM-IAES-ELCO ELCO, AES Audio Input, 110 Ohm
DRS-FRM-OAES-ELCO ELCO, AES Audio Output, 110 Ohm
DRS-FRM-64-IOAES-ELCO ELCO, AES Audio Input/Output

Related Products

Leave a Reply

 
Translate »