Ocelot 3G-SDI Router 16X8 | 16X16

project posted:

3G-SDI 16X8 or 16X16
PESA’s Ocelot-3 is a one rack unit, 16×8 or 16×16, video router which supports all SMPTE standard data rates from 143Mbps to 3Gbps with auto-equalization on all sixteen standard 75 Ohm input BNCs. Auto-rate sensing and auto-reclocking is standard on all sixteen 75 Ohm output BNCs with full support for DVB-ASI on every path. A single standard 75 Ohm BNC reference input is provided, capable of accepting analog black burst or analog composite sync in NTSC or PAL formats. The Ocelot-3 can be equipped with single or dual power supplies and is compatible with all existing Ocelot control panels and PESA control systems.

FEATURES

PESA’s Ocelot 3 is a one rack unit, 16×8 or 16×16, video router that supports all SMPTE standard data rates from 143Mbps to 3Gbps with auto-equalization on all sixteen standard 75 Ohm input BNCs.

Auto-rate sensing and auto-reclocking is standard on all sixteen 75 Ohm output BNCs with full support for DVB-ASI on every path. A single, standard 75 Ohm BNC input is provided for connection of a sync reference signal from an external source. Ocelot can accept any of the following sync sources: analog black burst or analog composite sync in NTSC or PAL formats.

The Ocelot-3 can be equipped with single or dual power supplies and is compatible with all existing Ocelot control panels and PESA control systems.

SPECIFICATIONS

Serial Digital Video Module Specifications

Inputs/Outputs

Connector Type Standard 75 Ohm, Self-terminating, SMPTE 259M, 292M, 424M
Return Loss >15dB from 5Mhz to 1.5Ghz
>10dB, 1.5Ghz to 3GHz
Equalization SMPTE 259M – 300m; SMPTE 292M – 100m
SMPTE 424M – 80m
Based on Belden 1694a or equal
Level 800mVpp+/-10%
Digital Signal Performance Specifications

Inputs/Outputs

Rise/Fall Time < 600 ps, +/- 10% | SMPTE 259M
< 270 ps, | SMPTE 292M
< 135ps, | SMPTE 424M
Overshoot < 10% of amplitude ( max.)
Alignment Jitter < 0.2UI , 100kHz to 150MHz SMPTE259M or SMPTE292M
< 0.3UI, 150MHz to 300MHz SMPTE424M
Timing Jitter <1.0UI from 10Hz to 100kHz | SMPTE 259/292
Operational Mode AUTO – detects correct signal type
BYPASS – allow signals to pass w/o reclocking
Reference Inputs Two independent 75Ohm BNCs, 0.5Vpp to 2.0Vpp; PAL, or NTSC

Ocelot-config-chart-02

Related Products

Leave a Reply

 
Translate »